Android Alliance

Odin keeps giving me a fail when I try to flash the firmware. Be advised this is after the latest update

Can you post some screen shots?

<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!

Are you waiting for the COM box to turn green first? It can take a bit

The ID:COM box?

If so no. It was still blue be for I pushed start

Ken wrote:4975 If so no. It was still blue be for I pushed start

Was there any COM number listed in the box, like here:

http://img.photobucket.com/albums/v71/C ... rarumr.png

Yes. Except it said com5. Instead of com7 like in the tutorial

Ken wrote:5040 Yes. Except it said com5. Instead of com7 like in the tutorial

Seems that the note is recognized so far, can you transfer files there an vice versa?

There are some things to try:

-check your usb configuration in developer options: try to change between mtp and ptp
-unplug and plug your note
-try another usb port at pc
-try to repeat flash process (there are reports from other who needed 10 or more tries)
-try another pc / operating system (some problems related to windows 10, windows 7 has best experience
-sometimes security software installed at pc causes problems

sadly at 19% till death
I'm getting the same thing catwoman is getting,
<ID:1/004> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:1/004> File analysis..
<ID:0/003> SetupConnection..
<ID:1/004> SetupConnection..
<ID:1/004> Initialzation..
<ID:1/004> Set PIT file..
<ID:1/004> DO NOT TURN OFF TARGET!!
<ID:1/004> Get PIT for mapping..
<ID:1/004> Firmware update start..
<ID:1/004> SingleDownload.
<ID:1/004> emmc_appsboot.mbn
<ID:1/004> lksecapp.mbn
<ID:1/004> xbl.elf
<ID:1/004> FAIL! (Auth)
<ID:1/004>
<ID:1/004> Complete(Write) operation failed.

It just gave me this <ID:1/004> Complete(Write) operation failed.
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 2

olkil1 wrote:5065 check your usb configuration in developer options: try to change between mtp and ptp

try to check your usb configuration in developer options: try to change between mtp and ptp

or one of the other hints in my post #9 above

did all those, still didn't work, even went to a different computer with windows 7. I fought the good fight, I shall fight no more....... I assume it's because I have the original battery phone, maybe that makes a difference but it's not working. Goodbye

Does the Com 4 Make the difference vs the Com7 in the tutuorial?

Com and the number is just the sun port you are using. The bootloader is locked. Turn off your phone for now. We are working on a fix