Android Alliance

Hi,

My phone received an update and I accepted it(

My SV is N930VVRS3APL2

Than i found this topic on xda https://forum.xda-developers.com/note-7 ... d-t3718833

I succefully flashed the first file and after reboot got an error: SBL Error

Than I flashed second file ...Fix_Charge_100%_Ok but it was stopped at secure check fail: modem, eMMC write fail: modem

I was using Odin.Prince.Comsy and Odin3_v3.13.1_3B_PatcheD

Than I found this forum and tried this tutorial viewtopic.php?f=44&t=2652

no luck

what i'm doing wrong and what's my options?

Thank you!

Seems that sth. went wrong while flashing. If I read the OP on XDA some people say files were corrupt. So some parts maybe not flashed ok:

Please look at this video, maybe it helps:

https://www.youtube.com/watch?v=_7XhxFWlyhI

This guy has posted another video on yt, where he says it works with N7 too.

https://www.youtube.com/watch?v=DjHbCfSH0hI

Also read this post here:

https://forum.xda-developers.com/galaxy ... r-t3592222

User bangbusdriver describes there what the guy on youtube is saying about the test point.

Hi,

My download mode is still working fine, but I don't know what I have to flash to get it fixed

i have tried lattest stock N930VVRS2APHE, AP_N930V_T_A_P_Fix_Charge_100%_Ok whith no luck, secure check fail

only one that succseeded was AP_N930VVRS3APL2_CL8720001_QB11952598_REV00_user_l ow_ship_MULTI_CERT_meta.tar but with SBL Error on reboot

Thank you for your replies, I appreciate it.

my download mode looks like this

https://i.ibb.co/1LzWPFK/20181207-021749.jpg

Hi,

I would like to thank bioslax from xda! This man saved my note7 :good:

if you have problems like me, flash this file https://drive.google.com/open?id=1LSPh5 ... rADgy-TUm7

p.s. admins you should save this file file for generation)

this is the mirror of bioslax file: https://mega.nz/#!Tfg0WIDA!Vqnbwg0xo30u ... IMIhP_ydSY

Thanks for the link.

If one ever flashed a file like: "only one that succseeded was AP_N930VVRS3APL2_CL..." as you wrote above, the phone has a baseband 3 level. Due to a Samsung e-fuse you can't get back to a lower baseband (2 or 1 in your case):

So only a firmware like you linked above: N930VVRS3APL2_FIX100%Charge (and is baseband 3 too), can help.